(
TD002G
Cordless Impact Driver
TD002G
Cordless Impact Driver
40Vmax Cordless Impact Driver 220 N·m
Features
Standard Equipments : Belt clip, Hand strap
Domestic Sales Model
Technical specifications
| Capacity Machine screw | M4 - M8 |
|---|---|
| Capacity Standard bolt | M5 - M16 |
| Capacity High strength bolt | M5 - M14 |
| No Load Speed | 0 - 3,700 minˉ¹ |
| Impacts Per Minute | 0 - 4,600 minˉ¹ |
| Max fastening torque | 220 N·m |
| Dimensions (L x W x H) | 119 x 86 x 197 mm |
| Net weight | 1.7 - 2.9 kg |
• The hammer is designed to be driven by a dual spring unit consisting of two types of springs with different load capacities
• The hammer is driven by one spring in light-duty operation, and by two springs in heavy-duty operation. Thus, the impact power is adjusted according to the workload, providing added comfort in a wide range of applications from delicate screw tightening to heavy-duty metal fastening
• The above-mentioned optimal impact blow suppresses increase in recoil and vibration, which occur after the tool starts impact blow
(The two effects have been confirmed through the tests using 120 mm coarse thread screw)
• Brighter illumination on the workpiece obtained by:
∙ locating 4 LEDs on the front of tool head
∙ reducing projections that project from both sides of tool head and body
• Higher visibility of the workpiece achieved by using a newly designed LED lens to make the shadow of bit lighter
• With preglow and afterglow functions
• 3 brightness settings
Compared with our current models, increased screw tightening speed has been achieved by increasing the number of impacts in Mode 4 (Max impact mode)
The current design has been changed by adding camouflage pattern and more
• To turn on the light, set F/R change lever in the neutral position and pull the switch trigger. To turn off the light, pull the switch trigger again
• The light turns off automatically one hour after turned on
Reduced resistance allows for easier bit installation
Electric brake for maximum productivity